CDS 2.2.0.34

Printing / plotting of utilities (ie symbols) fixed in section outputs.

For symbol to be drawn in section the following things need to be done.

The point in the section must have a point code. When interpolating profiles and sections make sure you tick the box to include intersections with strings. Make sure strings for example a pipe are drawn.

The point is added to the section as part of the section. You also need to set it as a fixed point. In the section view - right click and select "reference coordinates". Change the appropriate point with the code so that the fp column is now showing as 1. Hit OK to save.

You must have a feature code library set up with the name of "section". ie from entry - menu - feature codes and setup a code library of section. The code library must have an entry that corresponds to the code. For example if you have a code of pipe then there must be an entry in feature code library of pipe as well.

ezigrade 2.1.0.24

Following has been updated

• heights, triangles, field-edges default to being off
• elevation and section elevation plot preview. Can now define the color's used and the height ranges. Values are stored for next job

CDS 2.2.0.33

Cogo - stakeout report was broken on last update.

CDS 2.2.0.32

File - Save As was corrupting the layer table; fixed.

CDS 2.2.0.31

Stakeout report. Now includes option for csv / rtf and also allows output of bearing in decimal degrees.

CDS 2.2.0.30

Point averaging - height was not being averaged.

On screen display by mode - now uses the accuracy value. For example set height accuracy value to 4 and it now displays onscreen to 4 decimal places.

CDS 2.2.0.29

Smartened the point average routine. A tolerance value has been added in. Points within the specified tolerance are averaged. Multiple batchs of points can be averaged in one command.