Return

Use Back buuton on your browser to return. Otherwise click here for Foresoft Home.

Thursday, January 28, 2010

CDS 2.1.0.21

Editting strings. Often when deleting points the string was not updated. Now fixed.

Wednesday, January 27, 2010

CDS 2.1.0.20

(1) When doing string change and entering in new point was not always saving this change.
(2) When entering a sequence (ie dot command eg 1.9 for 1,2,3 etc) was not recognizing it until a comma was added to the end.
(3) If you select some strings and then right click to bring up the menu ; there is now an option to close the selected string/strings.

Wednesday, January 20, 2010

CDS 2.1.0.19

CDS can now load and recall more than one plot parameter default. From File menu and plot parameters. If you press the "save defs" button a file name is prompted. You can then save as many different defaults as you need.
Pressing "Load Defs" brings up same filedialog box and you can load any saved definition file

Tuesday, January 19, 2010

CDS 2.1.0.18

(1) If to strings are overlapped and you click on it to select a string selection box will pop up and you can select the string of interest from the box
(2) When doing a raw export to a wild(leica) file the design heights were coming out at zero height if doing by design heights.

Ezigrade 2.1.0.7

Added in new menu item to store section edges as strings. Strings are created along the existing sections. They are in the "fields" folder. Also a string 0.1m inside the section is created. This can be used for breaklines etc. It is in the folder "fields_inside".
When in Ezigrade the function is run from the Fields menu and then "store fields as strings"

Monday, January 18, 2010

CDS 2.1.0.17

Printing or exporting multiple natural profiles. Sometimes profiles were going missing when printing 3 or more natural profiles.

Friday, January 8, 2010

CDS 2.1.0.16

The last section was not always being displayed in both the section view and on the plan view.

Thursday, January 7, 2010

Ezigrade 2.1.0.6

Ascii output. at end of each line put out incorrectly.
The triangle list now uses the zero based index's from the points list.

Wednesday, January 6, 2010

Ezigrade 2.1.0.5

Added in an option to create as ascii output file. This contains grid placement, sections, surface definition and equations to calculate output design. For farmscan integration.

Tuesday, January 5, 2010

CDS 2.1.0.15

(1) When updating points; sometimes the layer name was lost and reverted to layer 0. Problem was if layer name was in lower case.

(2) When displaying job onscreen "by Layers". Point text and Font is displayed at the plotted height. Point text is now defined as a real world height (meters or feet) rather than as a point height. What you see on the screen is what is plotted or as it goes to autocad.

(3) Seperate definition for height to autocad has been removed. What you see on the screen is what is plotted is what goes to autocad.