CDS 2.2.0.40

(1) If you do a strings select all and then a strings alter then layer could be set incorrectly

(2) Doing strings split. Sometimes layer, breaklines and by layer flag could be incorrectly set in the new strings.

(3) When creating dwg with points and using point text as block attributes. After editting the text offset could inadvertantly change as the offsets in the block definition where different to the block reference if the block was put out at a scale different to 1.0

CDS 2.2.0.39

(1) when creating symbols with attributes to dwg, the attributes saved in the block could be at the wrong size.

(2) profile design. You know have the option for the vertical curves to be represented as circular arcs. Handy for design of pipes. In profile view right click and click on plot parameters. You will see the tick box for circular arcs under the design section. A warning is shown in profile view so that you don't inadvertantly do a road design with a circular arc. For road design leave it unticked and parabola is used.

CDS 2.2.0.38

After doing a File - Save As then it was possible symbols were being repeated - fixed.

The point - scale option now has an option to scale around an existing point. You can still do an absolute scale around the 0,0 point.

CDS 2.2.0.39

When creating a dwg with points put out as blocks with attributes. The block definitions were being put out rotated but attributes were put out horizontal. Once they were editted it caused text attributes to be displayed vertically.

CDS 2.2.0.37

Program could crash if displaying layer names on screen and layers were more than 25 characters long.