Ezigrade 2.7.0.38

Have added in a routine for data thinning. This allows you to cut down the number of points in the job. Handy for speeding up the program when doing triangle based grading without compromising accuracy too much.

CDS 2.7.0.34

When running Autoroad we now have an option to automatically set the codes of any new points that are created.

Ezigrade 2.7.0.37

If you have a multi-section Ezigrade job and one of the sections is 4way, then it can forget to grade some of the sections.

Ezigrade 2.7.0.36

We have created two new measurement routines:

1. You can draw a line and show the distance, grade and design grade
2. You can draw an enclosed polygon and the area is reported. Finish with the "enter" key and the respective volumes if available are shown.

We have filled in the control bar with some new quick select icons

• +  toggle point display
• P toggle point number
• H toggle height display
• D toggle design height display
• "parallel lines" toggle contour display
• "desktop" zoom extents
• "desktop with magnifying glass" zoom window
• "line with text" measure length, grade and design grade
• "polygon" measure area. Enter at end displays volumes 

Ezigrade 2.7.0.35

Ezigrade - The GPS options have been tested in a John Deere environment. To pick up data:

• open a new job
• from file menu - GPS - set serial port
• File - GPS - Pickup
• File - GPS - OPtions and set pickup parameters
• Drive around your paddock

We have been working on simplifying the software and hiding details for casual users. When now do a grading, design and cut/fill surfaces are automatically updated. There is now a combo box to easily display different surfaces (ie natural / design / cut and fill)

Ezigrade 2.7.0.35

Ezigrade now allows you to set common links beween sections as a hinge line. The two sections then hinge together. This only works when both sections are designed as planes.

CDS 2.7.0.33

When displaying by layer - points with null heights could have a height displayed onscreen.

There was an issue when rounding bearings to the closest 5 seconds.